NEWS
YOUTUBE
INSTAGRAM
OIL FILLER CAP FORESTER(SJ)
The image is for illustrative purposes only.
The image is for illustrative purposes only.
Part number: ST15257ZR010
* Part numbers differ depending on the country.
* Part numbers differ depending on the country.
This oil filler cap consists of a die-cast aluminum base that has been machined, and given a stylish resin cover.
Shape of the cap has been specially designed to allow for use even when wearing work gloves.
For times when the cap is difficult to remove, it contains special service holes under the resin cover that allow you to use the on-board wheel wrench to loosen the cap when it is too tight to do so by hand. The silver aluminum base with embossed black cap showing the cherry red STI logo adds "functional beauty" to the engine compartment.
Shape of the cap has been specially designed to allow for use even when wearing work gloves.
For times when the cap is difficult to remove, it contains special service holes under the resin cover that allow you to use the on-board wheel wrench to loosen the cap when it is too tight to do so by hand. The silver aluminum base with embossed black cap showing the cherry red STI logo adds "functional beauty" to the engine compartment.
* A gasket is not included. Please use the one attached to the filler cap you removed. If using a new gasket, be sure to use a genuine product for the corresponding model.
* If this product is installed on non-compatible models, there is the risk of deformation in the oil filler neck.
* The logo may not face the front.
* If this product is installed on non-compatible models, there is the risk of deformation in the oil filler neck.
* The logo may not face the front.
Please consult with your local SUBARU dealership or an authorized SUBARU distributor to confirm the compatibility of the parts available on this website.
