NEWS
YOUTUBE
INSTAGRAM
FLEXIBLE DRAW STIFFENER Rr IMPREZA 4Door(GK)
The image is for illustrative purposes only.
The image is for illustrative purposes only.
The image is for illustrative purposes only.
The image is for illustrative purposes only.
The image is for illustrative purposes only.
Part number: ST20168VR000
* Part numbers differ depending on the country.
* Part numbers differ depending on the country.
In addition to increasing the rigidity at the front of the car with the FLEXIBLE V BAR or FLEXIBLE TOWER BAR, we recommend that you also install this product, to improve the followability of the rear of the car together with the FLEXIBLE V BAR or FLEXIBLE TOWER BAR.
By attaching this to the rear ends of the left and right rear frames (inside the rear bumper) and applying moderate tension, it corrects the bending of the chassis when the car is running. This leads to both initial agile steering and a smooth ride.
As this part improves the road-contact of the four wheels, driving stability during cornering increases, and thus a quick and straightforward steering feeling can be realized.
This product comes with a original sticker. (Sticker size: length 41 mm x width 36 mm)
By attaching this to the rear ends of the left and right rear frames (inside the rear bumper) and applying moderate tension, it corrects the bending of the chassis when the car is running. This leads to both initial agile steering and a smooth ride.
As this part improves the road-contact of the four wheels, driving stability during cornering increases, and thus a quick and straightforward steering feeling can be realized.
This product comes with a original sticker. (Sticker size: length 41 mm x width 36 mm)
* To install this product, removal and reattachment of the rear bumper face is required.
* The included sticker is a complimentary gift and not sold separately.
Please note that the sticker is not eligible for repair caused by a mistake in applying or damage in its use.
* The images illustrate how this product is installed on the LEVORG (VN type) and SUBARU BRZ (ZD type).
Please note that this product is actually installed inside the bumper and is not visible from the outside.
* On the LEVORG (VM type) this part cannot be installed together with the STI Rear Under Spoiler (part number: SG517VA360, SG517VA310) because the mounting location is the same.
* Cannot install together with other products(Ex. Hitch member) which attaches to the bumper beam.
* The included sticker is a complimentary gift and not sold separately.
Please note that the sticker is not eligible for repair caused by a mistake in applying or damage in its use.
* The images illustrate how this product is installed on the LEVORG (VN type) and SUBARU BRZ (ZD type).
Please note that this product is actually installed inside the bumper and is not visible from the outside.
* On the LEVORG (VM type) this part cannot be installed together with the STI Rear Under Spoiler (part number: SG517VA360, SG517VA310) because the mounting location is the same.
* Cannot install together with other products(Ex. Hitch member) which attaches to the bumper beam.
Please consult with your local SUBARU dealership or an authorized SUBARU distributor to confirm the compatibility of the parts available on this website.
