NEWS
YOUTUBE
INSTAGRAM
COIL SPRING R WRX S4(VA)
The image is for illustrative purposes only.
Part number: ST20380VV030 WRX S4 BILSTEIN
* Part numbers differ depending on the country.
* Part numbers differ depending on the country.
These coil springs were developed through repeated driving tests under various conditions to achieve the best possible match with genuine dampers and EyeSight. They increase roll rigidity and improve driving stability without ever compromising passenger comfort which is essential for grand touring cars. The vehicle height is 7 mm lower compared to standard models to reduce roll and give SUBARU WRX S4 model a more sporty look. Approximately.
7 mm lower / Compatible with EyeSight
7 mm lower / Compatible with EyeSight
* The part number is for one spring (1 piece), need 2 pieces for both sides.
* These coil springs are for compatible models only.
*For standard rear shock absorber.
* If they are installed on a different model, it may upset the front/rear balance. Do not install on a non-compatible model.
* Vehicle height is reduced by approximately 7 mm from the standard height (when the car is empty). However, the change in car height might vary depending on optional accessories installed and individual differences in car bodies and parts.
* For vehicles equipped with standard Bilstein dampers.
* These coil springs are for compatible models only.
*For standard rear shock absorber.
* If they are installed on a different model, it may upset the front/rear balance. Do not install on a non-compatible model.
* Vehicle height is reduced by approximately 7 mm from the standard height (when the car is empty). However, the change in car height might vary depending on optional accessories installed and individual differences in car bodies and parts.
* For vehicles equipped with standard Bilstein dampers.
Please consult with your local SUBARU dealership or an authorized SUBARU distributor to confirm the compatibility of the parts available on this website.
